For years there seemed to be a single trustworthy way for you to store data on your personal computer – employing a disk drive (HDD). Nonetheless, this kind of technology is by now expressing its age – hard drives are actually noisy and slow; they’re power–hungry and are likely to create quite a lot of heat in the course of serious procedures.

SSD drives, however, are really fast, consume a lesser amount of energy and they are far less hot. They feature a completely new approach to file accessibility and storage and are years ahead of HDDs with regard to file read/write speed, I/O performance and then energy efficacy. Find out how HDDs fare up against the modern SSD drives.

1. Access Time

After the release of SSD drives, data accessibility rates are now through the roof. As a result of completely new electronic interfaces employed in SSD drives, the common data access time has been reduced to a record low of 0.1millisecond.

The concept powering HDD drives goes all the way back to 1954. And while it’s been significantly enhanced through the years, it’s nonetheless no match for the ground breaking concept powering SSD drives. Through today’s HDD drives, the highest file access rate you can actually attain can vary somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

Because of the brand new significant data file storage solution adopted by SSDs, they feature quicker file access rates and speedier random I/O performance.

Throughout HOSTMBM’s trials, all SSDs showed their ability to take care of a minimum of 6000 IO’s per second.

Throughout the very same tests, the HDD drives turned out to be significantly slower, with 400 IO operations handled per second. Although this may seem like a significant number, if you have an overloaded web server that serves a lot of famous websites, a sluggish hard disk drive may result in slow–loading sites.

3. Reliability

SSD drives are lacking any sort of rotating parts, which means there is much less machinery inside them. And the less actually moving parts you will discover, the lower the prospect of failure can be.

The typical rate of failing of any SSD drive is 0.5%.

With an HDD drive to work, it should rotate a couple metal hard disks at over 7200 rpm, having them magnetically stable in the air. They have a substantial amount of moving components, motors, magnets along with other devices packed in a small location. Therefore it’s no wonder that the normal rate of failing of the HDD drive ranges somewhere between 2% and 5%.

4. Energy Conservation

SSD drives function practically noiselessly; they don’t create excess warmth; they don’t demand added chilling methods and also take in much less electricity.

Lab tests have demostrated the typical electricity intake of an SSD drive is amongst 2 and 5 watts.

HDD drives are renowned for becoming noisy. They need more electrical power for cooling reasons. Within a hosting server that has a variety of HDDs running constantly, you need a lot of fans to ensure they are cool – this makes them far less energy–effective than SSD drives.

HDDs consume between 6 and 15 watts.

5. CPU Power

The quicker the data file access speed is, the sooner the data queries will be adressed. Consequently the CPU won’t have to hold allocations waiting around for the SSD to reply back.

The average I/O delay for SSD drives is merely 1%.

HDD drives accommodate reduced accessibility speeds compared with SSDs do, which will result for the CPU having to hang on, whilst saving resources for your HDD to uncover and give back the required data.

The average I/O delay for HDD drives is around 7%.

6.Input/Output Request Times

The bulk of HOSTMBM’s completely new servers now use exclusively SSD drives. Our personal lab tests have demonstrated that utilizing an SSD, the normal service time for any I/O request whilst running a backup stays under 20 ms.

Throughout the exact same tests with the same hosting server, now fitted out using HDDs, overall performance was significantly reduced. During the web server backup procedure, the common service time for I/O demands varied somewhere between 400 and 500 ms.

7. Backup Rates

Speaking about backups and SSDs – we’ve observed a fantastic advancement in the data backup rate since we moved to SSDs. Currently, a usual web server backup can take only 6 hours.

On the flip side, on a web server with HDD drives, the same backup might take three or four times as long in order to complete. An entire back up of an HDD–driven hosting server typically takes 20 to 24 hours.

The VPS hosting plans as well as the routine shared website hosting plans accounts feature SSD drives by default. Be a part of our family here, at HOSTMBM, and find out how we just might help you enhance your website.


  • Service guarantees

  •  
  • Each of our Virtual Private Servers is setup for you 100% free. 99.9% network uptime. Full SSH/full root access.
  • Compare our prices

  •  
  • Preview the allocations and parameters offered by HOSTMBM’s Virtual Private Servers. You could start with a smaller VPS Hosting package and upgrade with just a click as your requirements expand.
  • Compare our hosting plans
  • Contact Us

  •  
  • It is easy to get in contact with us round the clock by email or by utilizing our extremely–fast ticketing platform. We offer a 1–hour reply time frame warranty.